The use of shape memory alloys in fuses for the protection of electrical installations
DOI:
https://doi.org/10.20998/2074-272X.2026.2.01Keywords:
functional materials, fuse, shape memory alloy, thermosensitive elementAbstract
Problem. The degree of damage to electrical installations during short circuits depends on the response time of the protection. An effective way to enhance the current-limiting effect in electrical fuses (reducing their response time) may be the use of shape memory alloy (SMA) elements. However, this requires careful study and research. The goal of the work is to establish the patterns of strengthening the current-limiting effect of a fuse (reducing the response time) when using thermosensitive elements made of shape memory alloys. The achievement of this goal is based on the analysis of experimental studies conducted by the authors and mathematical models of the characteristics of a fuse containing an SMA element. Methodology. The article presents mathematical modelling of the parameters and characteristics of fuses with thermomechanical destruction of the fuse element, as well as a thermophysical model of a fuse with a thermosensitive SMA element. The article presents the results of experimental studies of a traditional fuse and a fuse equipped with a thermosensitive SMA element. For each current, the response time of the modified fuse was shorter than that of the traditional fuse. The use of a thermosensitive element reduced the response time by more than 20 times for a current of 10 A and approximately 10 times (from 0.257 s to 0.0244 s) for a current of 20 A. For the highest tested current (90 A), the fuse response time was half that of a traditional fuse. The article also presents the results of calculations of fuse characteristics using a mathematical model and a comparison with the results of experimental studies. Scientific novelty. The developed mathematical models of the characteristics of electrical fuses containing SMA elements made it possible for the first time to substantiate the interrelationships between the parameters (geometric dimensions and characteristics of SMA elements, fuse links) with current loads of electrical installations. The practical value of the work lies in the proposed use of thermosensitive elements made of functional materials to increase the current-limiting effect of electrical fuses for protecting electrical installations during short circuits. References 19, tables 2, figures 7.
References
Grechko O., Baida Y., Sereda O., Sereda O., Pantelyat M., Dryvetskyi S. Improvement of Fuses to Increase the Efficiency of Medium Voltage Instrument Transformers Protection. 2025 IEEE 6th KhPI Week on Advanced Technology (KhPIWeek), 2025, pp. 1-4. doi: https://doi.org/10.1109/KhPIWeek61436.2025.11288696.
Kozyrskyi V., Gay O., Synyavskyi O., Savchenko V., Makarevyth S. Optimization of sectionalisation parameters of distributive electric networks. Handbook of Research on Smart Computing for Renewable Energy and Agro-Engineering, 2020, pp. 78-105. doi: https://doi.org/10.4018/978-1-7998-1216-6.ch004.
Kozyrsky V., Kaplun V., Firstov G., Likhachov O. Monograph. Electrical equipment based on functional materials. Kyiv, NUBIP Publ., 2014. 409 p. (Ukr).
Sharma N., Jangra K., Raj T. Applications of Nickel-Titanium Alloy. Journal of Engineering and Technology, 2015, vol. 5, no. 1, pp. 1-7. doi: https://doi.org/10.4103/0976-8580.149472.
Bubley I.R., Koval Y.N., Likhachev A.A., Sych T.G., Zatsarnaya A.V. Investigation at Aging of Functional Properties of Alloy of Cu–Al–Mn System Alloyed with Co. Metallofizika i Noveishie Tekhnologii, 2021, vol. 43, no. 12, pp. 1627-1637. doi: https://doi.org/10.15407/mfint.43.12.1627.
Sun S., Yu J., Chang Y., Zheng Y., Wang C. Effect of Al content and quenching on the microstructure and mechanical properties of as-cast Cu–Al–Mn shape memory alloy. Materials Chemistry and Physics, 2025, vol. 345, art. no. 131282. doi: https://doi.org/10.1016/j.matchemphys.2025.131282.
CAMITAL brand registration certificate no. 163545. Available at: https://alotek.international/uploads/230/1jgmO5anW3WCOVP22n2bZsx7RSeMc9-metaQ2FtaXRhbCDQodCy0LjQtNC10YLQtdC70YHRgtCy0L4r0LfQsCvRgNC10LPQuNGB0YLRgNCw0YbQuNGPLnBkZg==-.pdf (Accessed 20 May 2025).
Theren B., Schmelter T., Chromik P., Kuhlenkötter B. Investigations Regarding the Longterm Behaviour of Electrically Heated SMA Wires Using Alternating Current. Proceedings of ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2021, art. no. V001T06A003. doi: https://doi.org/10.1115/SMASIS2021-67649.
Panciroli R. Influence of electric current on the thermo-mechanical static and fatigue properties of shape memory NiTi wires. Smart Materials and Structures, 2020, vol. 29, no. 11, art. no. 115046. doi: https://doi.org/10.1088/1361-665X/abb986.
Kozyrskyi V., Bunko V. Experimental Studies of Elements from the Functional Intermetallic Cu-Al-Mn for Construction of a Heat Engine and Power Plant. Problems of the Regional Energetics, 2025, vol. 3, no. 67, pp. 162-173. doi: https://doi.org/10.52254/1857-0070.2025.3-67.14.
Bunko V.Ya., Kozyrskyi V.V. Research of elements with shape memory effect and determination of their thermo-mechanical characteristics at different hardening temperatures. Collection of Scientific Papers of Admiral Makarov National University of Shipbuilding, 2024, no. 1 (494), pp. 69-73. (Ukr).
Gorges T., Seelecke S., Motzki P. Alternating current activation of SMA wires. GMM-Fachberichte, 2021, vol. 2021-February, no. 98, pp. 149-151.
EATON. High speed fuse application guide. 2016. 44 p. Available at: https://www.eaton.com/content/dam/eaton/products/electrical-circuit-protection/bussmann-iec-high-speed-semi-conductors-fuses/eaton-bussmann-series-high-speed-fuses-application-guide-br132015en-en-us.pdf (Accessed 20 May 2025).
Kravets A.V., Kozyrskyi V.V. Fuse. Patent USSR no. 1707646, 1992, bulletin no. 3. 14 p. (Rus).
Chiriac G. Thermal analysis of fuses with variable cross-section fuselinks. Electric Power Systems Research, 2012, vol. 92, pp. 73-80. doi: https://doi.org/10.1016/j.epsr.2012.06.010.
Todorov G., Kamberov K. EV fuse design cost reduction based on Thermal-Electric Conduction analyses. Case Studies in Thermal Engineering, 2020, vol. 21, art. no. 100692. doi: https://doi.org/10.1016/j.csite.2020.100692.
Fernandez E., Torres E., Zamora I., Mazon A.J., Albizu I. Thermal model for current limiting fuses installed in vertical position. Electric Power Systems Research, 2014, vol. 107, pp. 167-174. doi: https://doi.org/10.1016/j.epsr.2013.10.004.
Torres E., Mazón A.J., Fernández E., Zamora I., Pérez J.C. Thermal performance of back-up current-limiting fuses. Electric Power Systems Research, 2010, vol. 80, no. 12, pp. 1469-1476. doi: https://doi.org/10.1016/j.epsr.2010.06.010.
Thermal relay. Alotek Technology. Available at: https://alotek.international/components/termorele_vid_alotek_technology (Accessed 20 May 2025).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 V. V. Kozyrskyi, T. Nurek, J. Sloma, V. Ya. Bunko, M. V. Goncharuk
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
