Design optimization for enhancing performances of integrated planar inductor for power electronics applications
DOI:
https://doi.org/10.20998/2074-272X.2024.6.11Keywords:
integrated square micro-coil, electrical characteristics, thermal modeling, electromagnetic phenomena, substrate materialAbstract
Goal. In this work, the performance of an integrated planar inductor with a square geometric shape using different materials for the substrate: Ni-Fe, Mn-Zn and Ni-Zn have been analyzed and investigated in order to assess the impact of the substrate material on the performance of the integrated planar inductor and to determine the optimal material in the various applications of power modules in power electronics. Methods. To this end, we carried out an in-depth analysis of the geometric dimensions of the integrated planar inductor, by calculating all the geometric parameters of the proposed structure, to establish an equivalent physical model of the integrated planar inductor in order to evaluate its different electrical specifications. The numerical simulation, based on the three-dimensional mathematical model of the system using Maxwell’s equations, was realized by COMSOL Multiphysics software. Results show the importance of the substrate material for the performance of the integrated planar inductor, and specify that the use of Ni-Fe ferrite as a substrate of the integrated planar inductor gives very interesting performance compared to other materials studied. The presented results provide valuable information on the influence of substrate material on the performance of embedded integrated planar inductor and can help to design and optimize these components for use in power electronic systems. Practical value. These results are significant for a wide range of applications, where the integrated planar inductor performance and efficiency can have a significant impact on the overall performance and cost-effectiveness of the power electronic device. References 37, tables 2, figures 7.
References
Kharbouch H., Guettaf Y., Hamid A., Bley V., Benhadda Y. Design and Implementation of Inductors with Variable Conductor Width Integrated in a Boost Micro Converter. Transactions on Electrical and Electronic Materials, 2021, vol. 22, no. 4, pp. 519-530. doi: https://doi.org/10.1007/s42341-020-00261-5.
Guettaf Y., Flitti A., Bensaci A., Kharbouch H., Rizouga M., Hamid A. Simulation of the operation of a DC–DC converter containing an inductor of planar type. Electrical Engineering, 2018, vol. 100, no. 2, pp. 953-969. doi: https://doi.org/10.1007/s00202-017-0558-7.
Derkaoui M., Benhadda Y., Hamid A. Modeling and simulation of an integrated octagonal planar transformer for RF systems. SN Applied Sciences, 2020, vol. 2, no. 4, art. no. 656. doi: https://doi.org/10.1007/s42452-020-2376-1.
Namoune A., Taleb R., Mansour N., Benzidane M.R., Boukortt A. Integrated through-silicon-via-based inductor design in buck converter for improved efficiency. Electrical Engineering & Electromechanics, 2023, no. 6, pp. 54-57. doi: https://doi.org/10.20998/2074-272X.2023.6.09.
Xu D., Guan Y., Wang Y., Wang W. A review of high frequency resonant DC-DC power converters: Topologies and planar magnetic technologies. Science China Technological Sciences, 2020, vol. 63, no. 8, pp. 1335-1347. doi: https://doi.org/10.1007/s11431-020-1665-3.
Medjaoui F.Z., Hamid A., Guettaf Y., Spiteri P., Bley V. Conception and Manufacturing of a Planar Inductance on NiFe Substrate. Transactions on Electrical and Electronic Materials, 2019, vol. 20, no. 3, pp. 269-279. doi: https://doi.org/10.1007/s42341-019-00105-x.
Kim S.-G., Yun E.-J., Kim J.-Y., Kim J., Cho K.-I. Microfabrication and characteristics of double-rectangular spiral type thin-film inductors with an upper NiFe magnetic core. Journal of Applied Physics, 2001, vol. 90, no. 7, pp. 3533-3538. doi: https://doi.org/10.1063/1.1399026.
Liu X., Wang T., Gao F., Khan M.M., Yang X., Rogers D.J. A Resonant Inductor Integrated-Transformer-Based Receiver for Wireless Power Transfer Systems. IEEE Transactions on Industrial Electronics, 2023, vol. 70, no. 4, pp. 3616-3626. doi: https://doi.org/10.1109/TIE.2022.3174286.
Meshkat A., Dehghani R., Farzanehfard H., Khajehoddin S.A. Improved On-Chip Inductor Design for Fully Integrated Voltage Regulators. IEEE Journal of Emerging and Selected Topics in Power Electronics, 2022, vol. 10, no. 6, pp. 7397-7409. doi: https://doi.org/10.1109/JESTPE.2022.3199692.
Shaltout A.H., Gregori S. Layout optimization of planar inductors for high-efficiency integrated power converters. Analog Integrated Circuits and Signal Processing, 2020, vol. 102, no. 1, pp. 155-167. doi: https://doi.org/10.1007/s10470-019-01494-y.
Shetty C., Smallwood D.C. Design, Modeling, and Analysis of a 3-D Spiral Inductor With Magnetic Thin-Films for PwrSoC/PwrSiP DC-DC Converters. IEEE Access, 2022, vol. 10, pp. 92105-92127. doi: https://doi.org/10.1109/ACCESS.2022.3200335.
Jiao D., Ni L., Zhu X., Zhe J., Zhao Z., Lyu Y., Liu Z. Measuring gaps using planar inductive sensors based on calculating mutual inductance. Sensors and Actuators A: Physical, 2019, vol. 295, pp. 59-69. doi: https://doi.org/10.1016/j.sna.2019.05.025.
Freitas W.J., Manera L.T., Swart J.W. Functional cyclic bending test for integrated inductors on flexible Kapton substrate. Microelectronics Reliability, 2022, vol. 135, art. no. 114592. doi: https://doi.org/10.1016/j.microrel.2022.114592.
Khan F., Younis M.I. Investigation of on-chip integrated inductors fabricated in SOI-MUMPs for RF MEMS ICs. Analog Integrated Circuits and Signal Processing, 2020, vol. 102, no. 3, pp. 585-591. doi: https://doi.org/10.1007/s10470-020-01627-8.
Anthony R., Wang N., Casey D.P., Mathuna O.C., Rohan J.F. MEMS based fabrication of high-frequency integrated inductors on Ni–Cu–Zn ferrite substrates. Journal of Magnetism and Magnetic Materials, 2016, vol. 406, pp. 89-94. doi: https://doi.org/10.1016/j.jmmm.2015.12.099.
Murali P., Alvarez C., Suresh S., Losego M.D., Swaminathan M., Oishi Y., Uemura T., Nagatsuka R., Watanabe N. Semi-additive patterning process based fabrication of miniaturized, package-embedded high conversion ratio inductors for DC-DC converters. Power Electronic Devices and Components, 2022, vol. 3, art. no. 100023. doi: https://doi.org/10.1016/j.pedc.2022.100023.
Shetty C. A detailed study of Qdc of 3D micro air-core inductors for integrated power supplies: Power supply in package (PSiP) and power supply on chip (PSoC). Power Electronic Devices and Components, 2022, vol. 2, art. no. 100006. doi: https://doi.org/10.1016/j.pedc.2022.100006.
Liu S., Zhu L., Allibert F., Radu I., Zhu X., Lu Y. Physical Models of Planar Spiral Inductor Integrated on the High-Resistivity and Trap-Rich Silicon-on-Insulator Substrates. IEEE Transactions on Electron Devices, 2017, vol. 64, no. 7, pp. 2775-2781. doi: https://doi.org/10.1109/TED.2017.2700022.
Ouyang Z., Thomsen O.C., Andersen M.A.E. Optimal Design and Tradeoff Analysis of Planar Transformer in High-Power DC–DC Converters. IEEE Transactions on Industrial Electronics, 2012, vol. 59, no. 7, pp. 2800-2810. doi: https://doi.org/10.1109/TIE.2010.2046005.
Zhang W., Su Y., Mu M., Gilham D.J., Li Q., Lee F.C. High-Density Integration of High-Frequency High-Current Point-of-Load (POL) Modules With Planar Inductors. IEEE Transactions on Power Electronics, 2015, vol. 30, no. 3, pp. 1421-1431. doi: https://doi.org/10.1109/TPEL.2014.2320857.
Musunuri S., Chapman P.L., Zou J., Liu C. Design Issues for Monolithic DC–DC Converters. IEEE Transactions on Power Electronics, 2005, vol. 20, no. 3, pp. 639-649. doi: https://doi.org/10.1109/TPEL.2005.846527.
Hsiang H.-I. Progress in materials and processes of multilayer power inductors. Journal of Materials Science: Materials in Electronics, 2020, vol. 31, no. 19, pp. 16089-16110. doi: https://doi.org/10.1007/s10854-020-04188-8.
Ahmed B., Yacine G., Rabah D., Hamid M.-H.-A. Design and electromagnetic modeling of integrated LC filter in a buck converter. Facta Universitatis - Series: Electronics and Energetics, 2020, vol. 33, no. 2, pp. 289-302. doi: https://doi.org/10.2298/FUEE2002289A.
Pordanjani S.R., Mahseredjian J., Naïdjate M., Bracikowski N., Fratila M., Rezaei-Zare A. Electromagnetic modeling of inductors in EMT-type software by three circuit-based methods. Electric Power Systems Research, 2022, vol. 211, art. no. 108304. doi: https://doi.org/10.1016/j.epsr.2022.108304.
Sagar P., Gour A.S., Karunanithi R. A multilayer planar inductor based proximity sensor operating at 4.2 K. Sensors and Actuators A: Physical, 2017, vol. 264, pp. 151-156. doi: https://doi.org/10.1016/j.sna.2017.07.042.
Zhou G., Zhang W., He D., Li X., Wang S., Hong Y., Chen Y., Wang C., He W., Miao H., Zhou J. A novel structured spiral planar embedded inductor: Electroless-plating NiCoP alloy on copper coil as magnetic core. Journal of Magnetism and Magnetic Materials, 2019, vol. 489, art. no. 165363. doi: https://doi.org/10.1016/j.jmmm.2019.165363.
Bechir M.H., Yaya D.D., Kahlouche F., Soultan M., Youssouf K., Capraro S., Chatelon J.P., Rousseau J.J. Planar inductor equivalent circuit model taking into account magnetic permeability, loss tangent, skin and proximity effects versus frequency. Analog Integrated Circuits and Signal Processing, 2016, vol. 88, no. 1, pp. 105-113. doi: https://doi.org/10.1007/s10470-016-0697-1.
Benhadda Y., Hamid A., Lebey T. Thermal Modeling of an Integrated Circular Inductor. Journal of Nano- and Electronic Physics, 2017, vol. 9, no. 1, art. no. 01004. doi: https://doi.org/10.21272/jnep.9(1).01004.
Rizou M.E., Prodromakis T. Electrothermal deterioration factors in gold planar inductors designed for microscale bio-applications. Microelectronic Engineering, 2018, vol. 197, pp. 61-66. doi: https://doi.org/10.1016/j.mee.2018.05.006.
Vellvehi M., Jorda X., Godignon P., Ferrer C., Millan J. Coupled electro-thermal simulation of a DC/DC converter. Microelectronics Reliability, 2007, vol. 47, no. 12, pp. 2114-2121. doi: https://doi.org/10.1016/j.microrel.2006.10.009.
Sagar P., Hassan H.K., Lakshmi E.D.A., Akber K., Girish P.S., Gour A.S., Karunanithi R. Investigation on Temperature Dependent Inductance (TDI) of a planar Multi-Layer Inductor (MLI) down to 4.2 K. Review of Scientific Instruments, 2020, vol. 91, no. 8. doi: https://doi.org/10.1063/5.0008901.
Medjaoui F.Z., Mokhfi A., Guettaf Y., Spetiri P., Hamid A. Magnetothermal behavior of a planar coil. Transactions on Electrical and Electronic Materials, 2022, vol. 23, no. 2, pp. 171-181. doi: https://doi.org/10.1007/s42341-021-00337-w.
Derkaoui M., Benhadda Y., Hamid A., Temmar A. Design and Modeling of Octagonal Planar Inductor and Transformer in Monolithic Technology for RF Systems. Journal of Electrical Engineering & Technology, 2021, vol. 16, no. 3, pp. 1481-1493. doi: https://doi.org/10.1007/s42835-021-00692-x.
Fatna B., Mokhefi A., Hamid A., Yacine G., Fatima Zohra M., Spiteri P. Numerical investigation of the thermal convective phenomenon around a circular micro-coil with variable internal width. Production Engineering, 2023, vol. 17, no. 5, pp. 653-668. doi: https://doi.org/10.1007/s11740-023-01195-6.
Namoune A., Taleb R., Mansour N. Simulation of an integrated spiral inductor and inter-digital capacitor in a buck micro converter. Automatika, 2023, vol. 64, no. 2, pp. 268-276. doi: https://doi.org/10.1080/00051144.2022.2142572.
Gans Š., Molnár J., Kováč D. Estimation of electrical resistivity of conductive materials of random shapes. Electrical Engineering & Electromechanics, 2023, no. 6, pp. 72-76. doi: https://doi.org/10.20998/2074-272X.2023.6.13.
Zablodskiy M.M., Pliuhin V.E., Kovalchuk S.I., Tietieriev V.O. Indirect field-oriented control of twin-screw electromechanical hydrolyzer. Electrical Engineering & Electromechanics, 2022, no. 1, pp. 3-11. doi: https://doi.org/10.20998/2074-272X.2022.1.01.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 M. Si Ahmed, Y. Guettef, A. Mokaddem, A. Mokhefi, A. Hamid, P. Spiteri, F. Z. Medjaoui
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.