MODERNIZATION OF THE COMPLEX TYPE IK-1U FOR MEASURING THE IMPEDANCE OF THE GROUNDING DEVICE OF A LIGHTNING ARRESTER AND SUPPORTS OF TRANSMISSION LINES
DOI:
https://doi.org/10.20998/2074-272X.2019.3.09Keywords:
impedance, grounding device, lightning current (voltage) pulse, measuring complexAbstract
Purpose. The creation of a measuring device for determining the impedance of the grounding of lightning arresters and supports of overhead lines under the influence of aperiodic pulses with the parameters 1.2/50 μs, 8/20 μs and 10/350 μs. Methodology. For this purpose, electrical engineering theory, transient modeling software and natural modeling methods are used. Results. The parameters of the electrical circuits of the additional forming unit were determined to create lightning current pulses with parameters of 10/350 μs using the IK-1U measuring complex. According to the simulation results, a layout of the forming unit in the form of an attachment and the IK-1U complex with the upgraded power supply system were created. Oscillograms of the front and pulse duration are obtained. The specified model was tested when performing electromagnetic diagnostics of the state of the RFP for more than 100 operating electrical substations. Originality. The measuring complex IK-1U was improved, which made it possible to determine the impulse impedance of the grounding device of lightning arresters when exposed to a current of 10/350 μs, 8/20 μs and of voltages 1.2/50 μs. Practical value. Upgraded device allows measurements in accordance with modern international requirements.References
Natsional'nyy standart Ukrayiny. SOU 31.2-21677681-19:2009. Viprobuvannya ta kontrol' prystroyiv zazemlennya elektroustanovok. Tipova іnstruktsіya [National Standard of Ukraine SOU 31.2-21677681-19:2009. Test and control devices, electrical grounding. Standard instruction]. Kyiv, Mіnenergovugіllya Ukrayiny Publ., 2010. 54 p. (Ukr).
Koliushko D.G., Rudenko S.S. Analysis of methods for monitoring of existing energy objects grounding devices state at the present stage. Electrical engineering & electromechanics, 2019, no.1, pp. 67-72. doi: 10.20998/2074-272X.2019.1.11.
Pravyla ulashtuvannja elektroustanovok [Electrical Installation Regulations]. Kharkiv, Fort Publ., 2017. 760 p. (Ukr).
IEC 61024-1:1990. Protection of structures against lightning. Part 1: General principles.
IEC 62305-1. Risk management. Protection against lightning. Part 1. General principles.
IEC 61643-1:2005. Low-voltage surge protective devices – Part 1: Surge protective devices connected to low-voltage power distribution systems – Requirements and tests.
Baranov M.I., Koliushko G.M., Kravchenko V.I., Rudakov S.V. A powerful high-voltage generator of aperiodic impulses of current of artificial lightning with the peak-temporal parameters rated on an international standard IEC 62305-1-2010. Electrical Engineering & Electromechanics, 2015, no.1, pp. 51-56. doi: 10.20998/2074-272X.2015.1.10.
Kolobov V.V., Barannik M.B., Selivanov V.N. A new device for measuring tower grounding resistance using the impulse method. Trudy Kolskogo nauchnogo tsentra RAN, 2016, no.5, pp. 39-55. (Rus).
Djura D.A., Selivanov V.N. Instruments to measure impulse response of grounding Trudy Kolskogo nauchnogo tsentra RAN, 2013, no.4, pp. 56-66. (Rus).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 D. G. Koliushko, S. S. Rudenko, A. V. Plichko, V. I. Shcherbinin

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.