MODELING OF OPERATION MODES OF SHIP POWER PLANT OF COMBINED PROPULSION COMPLEX WITH CONTROL SYSTEM BASED ON ELECTRONIC CONTROLLERS
DOI:
https://doi.org/10.20998/2074-272X.2016.6.07Keywords:
ship power plants, combined propulsion complex, mathematical modeling, electronic controller, thruster, diesel, dynamic positioningAbstract
Purpose. Designing of diagrams to optimize mathematic model of the ship power plant (SPP) combined propulsion complexes (CPC) for decreasing operational loss and increasing fuel efficiency with simultaneous load limiting on medium revolutions diesel generator (MRDG) by criterion reducing of wear and increasing operation time between repairs. Methodology. After analyzing of ship power plant modes of CPC proposed diagrams to optimize mathematic model of the above mentioned complex. The model based on using of electronic controllers in automatic regulation and control systems for diesel and thruster which allow to actualize more complicated control algorithm with viewpoint of increasing working efficiency of ship power plant at normal and emergency modes. Results. Determined suitability of comparative computer modeling in MatLab Simulink for building of imitation model objects based on it block diagrams and mathematic descriptions. Actualized diagrams to optimize mathematic model of the ship’s power plant (SPP) combined propulsion complexes (CPC) with Azipod system in MatLab Simulink software package Ships_CPC for decreasing operational loss and increasing fuel efficiency with simultaneous load limiting on medium revolutions diesel generator (MRDG) by criterion reducing of wear and increasing operation time between repairs. The function blocks of proposed complex are the main structural units which allow to investigate it normal and emergency modes. Originality. This model represents a set of functional blocks of the components SPP CPC, built on the principle of «input-output». For example, the function boxes outputs of PID-regulators of MRDG depends from set excitation voltage and rotating frequency that in turn depends from power-station load and respond that is a ship moving or dynamically positioning, and come on input (inputs) of thruster rotating frequency PID-regulator models. Practical value. The results of researches planned to use in creation of software package Ships_CPC, in Mat Lab/Simulink was developed under the state budget project «Concepts, technologies and ways of improving ship plants combined propulsion complexes» at the Department of Electromechanics and Electrical Engineering of National University «Odessa Maritime Academy» (State registration number 0114u000340).References
1. Woud H.K., Stapersma D. Design of propulsion and electric power generation systems. IMarEST Publications, London, 2003. 494 р.
2. Budashko V.V., Onishchenko O.A. Improving management system combined thruster propulsion systems. Bulletin of NTU «KhPІ», 2014, no.38(1081), pp. 45-51. (Ukr).
3. Budashko V.V., Onishchenko O.A. Mathematical principles of simulation of power plant’s control system at drillship. Bulletin оf Kamchatka State Technical University, 2014, no.29, pp. 6-13. (Rus).
4. Hansen J.F. Modelling and control of marine power systems. Doktor ingeniør thesis, Trondheim, Norway, 2000. 119 p. Available at: http://www.itk.ntnu.no/databaser/dr_ing_avhandlinger/vedlegg/110_pdf.pdf (accessed 21 September 2015).
5. Budashko V.V., Yushkov Y.A. Mathematic modeling of all-range controllers speed of thrusters for ship power plants in combined propulsion complexes. Electronic Modeling, 2015, vol.37, no.2, pp. 101-114. (Rus).
6. Glazeva O.V., Budashko V.V. Aspects of the mathematical modelling of the elements for Western Systems Coordinating Council of combined propulsion complexes. Bulletin of NTU «KhPI». Series: Problems of Electrical Machines and Apparatus Perfection. The Theory and Practice, 2015, no.42(1151), pp. 71-75. (Ukr).
7. Bojko A.A., Budashko V.V., Yushkov E.A., Bojko N.A. Synthesis and research of automatic balancing system of voltage converter fed induction motor currents. Eastern-European Journal of Enterprise Technologies, 2016, vol.1, no.2(79), pp. 22-34. doi: 10.15587/1729-4061.2016.60544.
8. Chernikh I.V. SimPowerSystems: Modelirovanie elektrotekhnicheskikh ustroistv i sistem v Simulink (SimPowerSystems: Modeling of electrotechnical devices and systems in Simulink). Available at: http://matlab.exponenta.ru/simpower/book1/2.php (accessed 01 October 2015). (Rus).
9. Tokarev L.N. [Automated regulation systems. Tutorial]. Saint Petersburg, Notabene Publ., 2001. 191 p. (Rus).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 E. A. Yushkov
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.