EXPERIMENTAL RESEARCHES OF ELECTRO-THERMAL RESISTIBILITY OF SEND-OFFS AND CABLES TO ACTION RATIONED ON THE INTERNATIONAL STANDARD OF IEC 62305-1-2010 OF APERIODIC IMPULSE OF CURRENT OF ARTIFICIAL LIGHTNING
Keywords:high impulsive current of lightning, wires and cables of electric chains of objects of electric-power inductry, generator of high pulsed current of artificial lightning, electro-thermal resistibility to lightning of cable-explorer products
AbstractPurpose. Experimental researches of electro-thermal resistibility of cable-explorer products, applied in the power electric circuits of objects of electric-power industry, to action on its copper and aluminum parts bearings a current rationed on the International Standard of IEC 62305-1-2010 aperiodic impulse 10/350 μs of current of artificial lightning. Methodology. Electrophysics bases of technique of high tensions and high pulsed currents (HPC), and also scientific and technical bases of planning of devices of high-voltage impulsive technique and measuring HPC in them. Results. Experimental a way the quantitative levels of maximal values maximum of possible and critical closenesses of aperiodic impulse 10/350 μs of current of artificial lightning with rationed on the international standard of IEC 62305-1-2010 peak-temporal parameters and admittances on them in copper (aluminum) parts bearings a current of send-offs and cables with a polyethylene (PET) and polyvinylchloride (PVCH) isolation. Originality. First in world practice on the unique powerful high-voltage generator of HPC of artificial lightning experimental researches of resistibility to lightning of pre-production models of send-offs (cables) are conducted with copper (aluminum) tendons, PET and PVCH by an isolation, in-use in power electric circuits of electric-power industry objects. Practical value. The use in practice of protecting from lightning of the got results will allow substantially to promote functional and fire-prevention safety of engineering communications of objects of industrial electroenergy in the conditions of action on them of short shots of linear lightning.
IEC 62305-1: 2010 «Protection against lightning. Part 1: General principles». Geneva, IEC Publ., 2010.
IEC 62305-2: 2010 «Protection against lightning.− Part 2: Risk management». Geneva, IEC Publ., 2010.
IEC 62305-3: 2010 «Protection against lightning.− Part 3: Physical damage to structures and life hazard». Geneva, IEC Publ., 2010.
IEC 62305-4: 2010 «Protection against lightning.− Part 4: Electrical and electronic systems within structures». Geneva, IEC Publ., 2010.
GOST R MEK 62305-1-2010. Nacional'nyj standart Rossijskoj Federacii «Menedzhment riska. Zashhita ot molnii. Chast' 1: Obshhie principy» [GOST R IEC 62305-1-2010. National Standard of the Russian Federation. Risk management. Protection from lightning. Part 1: General principles]. Moscow, Standartinform Publ., 2011, 46 p. (Rus).
Deutsche Norm DIN EN 50164-1: 2008 (VDE 0185-2001). Blitzschutzbauteile. − Teil 1: Anforderungen an Verbindungsbauteile [German Norms DIN EN 50164-1: 2008 (VDE 0185-2001). Protecting from Lightning of Buildings and their Parts. Part 1: Requirements on Parts Buildings and of Connection]. Berlin, Publ. DS, 2008. 16 p. (Ger).
Baranov M.I., Koliushko G.M., Kravchenko V.I., Rudakov S.V. A powerful high-voltage generator of aperiodic impulses of current of artificial lightning with the peak-temporal parameters rated on an International Standard IEC 62305-1-2010. Elektrotekhnіka і elektromekhanіka – Electrical engineering & electromechanics, 2015, no.1, pp. 51-56. (Rus).
Berzan V.P., Gelikman B.Yu., Guraevsky M.N., Ermuratsky V.V., Kuchinsky G.S., Mezenin O.L., Nazarov N.I., Peregudova E.N., Rud' V.I., Sadovnikov A.I., Smirnov B.K., Stepina K.I. Elektricheskie kondensatory i kondensatornye ustanovki. Spravochnik [The electrical capacitors and condenser options. Directory]. Moscow, Energoatomizdat Publ., 1987, 656 p. (Rus).
Dashuk P.N., Zayents S.L., Komel'kov V.S., Kuchinskiy G.S., Nikolaevskaya N.N., Shkuropat P.I., Shneerson G.A. Tehnika bol'shih impul'snyh tokov i magnitnyh polej [Technique large pulsed currents and magnetic fields]. Moscow, Atomizdat Publ., 1970. 472 p. (Rus).
Baranov M.I., Koliushko G.M., Kravchenko V.I., Nedzelskyi O.S., Dnyschenko V.N. A current generator of the artificial lightning for full-scale tests of technical objects. Pribory i tekhnika eksperimenta – Instruments and experimental techniques, 2008, no.3, pp. 81-85. (Rus).
Baranov M.I. Selection and installation of high-voltage ceramic protective resistors in the charge-discharge circuit powerful capacitive energy storage. Visnyk NTU «KhPІ» – Bulletin of NTU «KhPІ», 2014, no.50(1092), pp. 13-20. (Rus).
Baranov M.I., Koliushko G.M., Nedzel'skiy O.S., Plichko A.V., Ponuzhdaeva E.G. High voltage-controlled high-current spark gap with graphite electrodes RVGU-50. Visnyk NTU «KhPІ» – Bulletin of NTU «KhPІ», 2014, no.50(1092), pp. 28-37. (Rus).
Baranov M.I., Koliushko G.M., Kravchenko V.I., Nedzel'skiy O.S. High-voltage high-current generator air gaps of the current artificial lightning. Pribory i tekhnika eksperimenta – Instruments and experimental techniques, 2008, no.6, pp. 58-62 (Rus).
Belorussov N.I., Saakjan A.E., Jakovleva A.I. Elektricheskie kabeli, provoda i shnury. Spravochnik [Electrical cables, wires and cords. Directory]. Moscow, Energoatomizdat Publ., 1988. 536 p. (Rus).
Baranov M.I., Kravchenko V.I. Electrothermal resistance wire and cable to the aircraft to the striking action pulsed current lightning. Elektrichestvo − Electricity, 2013, no.10, pp. 7-15. (Rus).
Orlov I.N. Elektrotehnicheskij spravochnik. Proizvodstvo i raspredelenie elektricheskoj energii. Tom 3, kn. 1 [Electrical Engineering Handbook. Production and distribution of electric energy. Vol. 3, book 1]. Moscow, Energoatomizdat Publ., 1988, 880 p. (Rus).
How to Cite
Copyright (c) 2016 M. I. Baranov, S. V. Rudakov
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.