CONTROLLABILITY OF NON-CONTACT MAGNETIC PULSE STRAIGHTENING

Authors

  • A. V. Gnatov Kharkiv National Automobile and Highway University, Ukraine

DOI:

https://doi.org/10.20998/2074-272X.2013.3.09

Keywords:

electromagnetic forming, non-contact straightening, magnetic-pulse action, magnetic pulse installation, dents removal, repair of vehicles

Abstract

Experimental research on dosing and controllability of non-contact magnetic pulse straightening is presented in the article. Illustrations of dosed magnetic-pulse action are given by the example of an element of a Subaru body panel. It is demonstrated that non-contact straightening does not damage the protective paint coating of a car body.

References

Beskontaktnaya vneshnyaya magnitno-impul'snaya rihtovka avtomobil'nyh kuzovov. Sbornik trudov HV mezhdunarodnoj nauchno-tehnicheskoj konferencii ["Avtomobil'nyj transport: problemy i perspektivy"], (Sevastopol', 10-17 sentyabrya 2012 g.) / A.V. Gnatov - Sevastopol': Vestnik SevNTU, 2012. - №. 134. - S. 131-134.

Gnatov A.V. Bezkontaktne magnіtno-іmpul'sne rihtuvannya avtomobіl'nih kuzovіv. Materіali mіzhnarodnoї naukovo-tehnіchnoї konferencії ["Fundamental'nі ta prikladnі problemi suchasnih tehnologіj"]. (Ternopіl', 19-21 travnya 2010 r.). - Ternopіl': Vіsnik TDTU, 2010. - T. 15. - № 2. - S. 164-171.

Turenko A.N. Impul'snye magnitnye polya dlya progressivnyh tehnologij. T. 3. Teoriya i `eksperiment prityazheniya tonkostennyh metallov impul'snymi magnitnymi polyami / Turenko A. N., Batygin Yu.V., Gnatov A.V.; monografiya. - Har'kov: HNADU, 2009. - 240 s.

Kuzovnoj remont legkovyh avtomobilej Mn.: Avtostil', 2003. - 272 s.

Laboratoriya `elektromagnitnyh tehnologij // Materіali sajtu - 2012. - Rezhim dostupu: http://electromagnetic.comoj.com.

Batygin Yu.V. Prityazhenie tonkostennyh metallicheskih listov magnitnym polem odnovitkovogo induktora / Yu.V. Batygin, A.V. Gnatov, S.A Schigoleva // `Elektrichestvo. - 2011. - № 4. - S. 55-62.

Batygin Yu.V. Magnitno-impul'snoe prityazhenie/ottalkivanie tonkostennyh listovyh ferromagnetikov / Yu.V. Batygin, A. V. Gnatov // `Elektrichestvo. -. 2012. - № 8. - S. 58-65.

Pat. 3,196,649 USA (SShA). Devices for metal-forming by magnetic tension / Harold P. Furth; zayavitel' i patentoobladatel' Advanced Kinetiks, Inc., Costa Mesa, California. - № 173,680; zavyal. 16.02.1962; opubl. 27.07.1965.

Pat. 3,998,081 USA (SShA), B21D 26/14. Electromagnetic dent puller / Hansen Karl A., Hendrickson Glen I.; zayavitel' i patentoobladatel' The Boeing Company, Seattle, Wash. - № 489,290 ; zayavl. 17.07.1974; opubl. 21.12.1976.

Pat. 5,046,345 USA (SShA), B21D 1/06. Power supply for electromagnetic proof load tester and dent remower / Zieve Peter B.; zayavitel' i patentoobladatel' Peter B. Zieve. - № 451,106 ; zayavl. 15.12.1989; opubl. 10.09.1991.

Electromagnetic Dent Removal // Materіali sajtu - 2013. - Rezhim dostupu: http://www.electroimpact.com/EMAGDR /overview.asp.

Need an electromagnetic dent remover on hand. Fluxtronic offers the best: the Portable Flux 3 dent remover // Materіali sajtu - 2013. - Rezhim dostupu: http://www.fluxtronic.com.

Downloads

Published

2013-07-02

How to Cite

Gnatov, A. V. (2013). CONTROLLABILITY OF NON-CONTACT MAGNETIC PULSE STRAIGHTENING. Electrical Engineering & Electromechanics, (3), 51–53. https://doi.org/10.20998/2074-272X.2013.3.09

Issue

No. 3 (2013)

Section

Engineering Electrophysics. High Electric and Magnetic Field Engineering

License

Copyright (c) 2015 A. V. Gnatov

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Authors who publish with this journal agree to the following terms:

1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.