AN INDUCTION INDUCTOR SYSTEM WITH A CIRCULAR TURN WITH A CUT BETWEEN TWO THIN-WALLED SHEET METALS
DOI:
https://doi.org/10.20998/2074-272X.2013.1.14Keywords:
magnetic pulse metal working, induction inductor system, electrodynamical processes, 3D distribution diagrams, researchAbstract
Research on electrodynamical processes in a system with an open cylindrical single-turn coil and two parallel flat thin-walled conductors placed symmetrically on the both sides of the coil has been carried out in this article. On the basis of obtained analytical relations, numerical evaluations have been made and three-dimensional amplitude-space distribution diagrams of induced current density and attraction force generated by the coil field have been plotted for various-size discontinuity.
References
Gnatov A.V. Progressivnye tehnologii. Teoriya i `eksperiment prityazheniya tonkostennyh metallov impul'snymi magnitnymi polyami: monografiya / A.V. Gnatov, Yu.V. Batygin, A.N. Turenko. - LAP LAMBERT Academic Publishing, 2011. - 238 s.
Gnatov A.V. Bezkontaktne magnіtno-іmpul'sne rihtuvannya avtomobіl'nih kuzovіv. Materіali mіzhnarodnoї naukovo-tehnіchnoї konferencії ["Fundamental'nі ta prikladnі problemi suchasnih tehnologіj"]. (Ternopіl', 19-21 travnya 2010 r. ). - Ternopіl': Vіsnik TDTU, 2010. - T. 15. - № 2. - S. 164-171.
`Eksperimenty po magnitno-impul'snomu prityazheniyu tonkostennyh listovyh metallov v avtomobilestroenii: 1-mezhdunarodnoj Internet-konferencii: ["Mehatronika transportnyh sredstv i tehnologicheskih mashin") (s 1.09.2010 g. po 30.11.2010 g.) Sbornik statej 1-j mezhdunarodnoj Internet-konferencii / Yu.V. Batigin, A.V. Gnatov. - Gubkinskij institut (filial) GOU VPO "Moskovskij gosudarstvennyj otkrytyj universitet" http://gubkin.msou.ru. Mehatronika transportnyh sredstv i tehnologicheskih mashin, 2010. - S. 77-86.
Progressivnye magnitno-impul'snye tehnologii na transporte. Tretya Mіzhnarodna naukovo-praktichna konferencіya ["Suchasnі іnformacіjnі tehnologії na transportі" MІNTT-2011]. U 2-h tt. Tom 2. (Herson, Ukraїna 23-25 travnya 2011 r.) / A.V. Gnatov. - Herson: Hersons'kij derzhavnij mors'kij іnstitut <http://www.kmi.kherson.ua/>, 2011. - S. 232-239.
Progresivnі tehnologії v avtotransportnih zasobah / Ch. II: Fіzichnі osnovi magnіtno-іmpul'snih tehnologіj bezkontaktnogo rihtuvannya kuzovnih elementіv avtomobіlya: navchal'nij posіbnik / Yu.V. Batigіn, A.V. Gnatov, І.S. Trunova, Є.A. Chapligіn. - Harkіv: HNADU, 2011. - 176 s.
Direction Change of the Force Action upon Conductor under Frequency Variation of the Acting magnetic Field: proceedings of the 1-st International Conference ["High Speed Metal Forming"], (Dortmund, March 31/April 1, 2004) / Yu.V. Batygin, V.I. Lavinsky, L.T. Khimenko. - Dortmund, Germany. 2004. - P. 157-160.
Pat. 75676 Ukraїna, MPK B 21 D 26/14. Sposіb magnіtno-іmpul'snoї obrobki tonkostіnnih metalevih zagotovok / Batigіn Yu.V., Lavіns'kij V.І., Himenko L.T.; zayavitel' i patentoobladatel' HPI. - №2004010512; zayavl.23.01.04; opubl. 15.05.06, Byul. №5.
Batygin Yu.V. Fizicheskie osnovy vozmozhnyh napravlenij razvitiya magnitno-impul'snoj obrabotki tonkostennyh metallov / Yu.V. Batygin, V.I. Lavinskij, L.T. Himenko // Elektrotehnіka і elektromehanіka. - 2004. - № 2. - S. 80-84.
Pat. 74909 Ukraїna, MPK B 21 D 26/14. Sposіb magnіtno-іmpul'snoї obrobki tonkostіnnih metalevih zagotovok / Batigіn Yu.V., Lavіns'kij V.І., Havіn V.L.; zayavitel' i patentoobladatel' HPI. - №2004010542; zayavl. 26.01.04; opubl. 15.02.06, Byul. №2.
Pat. 31751 Ukraїni, V 21 D 26/14. Sposіb magnіtno-іmpul'snoї obrobki metalevih zagotіvok metodom prityagannya do іnduktora / Batigіn Yu.V., Bondarenko O.Yu., Chapligіn Є.O.; zayavnik ta patentovlasnik Harkіvs'kij nac. avtom.-dorozhn. un-t. - № u200712252; zayavl. 05.11.2007; opubl. 25.04.08, Byul. №8.
Pat. 31752 Ukraїni, V 21 D 26/14. Sposіb magnіtno-іmpul'snoї obrobki metalevih zagotіvok / Batygin Yu.V., Bondarenko A.Yu., Serikov G.S.; zayavnik ta patentovlasnik Harkіvs'kij nac. avtom.-dorozhn. un-t. - № u200712252; zayavl. 05.11.2007; opubl. 25.04.08, Byul. №8.
Batygin Yu.V. `Elektromagnitnye processy v indukcionnoj induktornoj sisteme s krugovym vitkom s razrezom mezhdu dvumya tonkostennymi metallicheskimi listami / Yu.V. Batygin, A.V. Gnatov, E.A Chaplygin, D.O. Smirnov // Elektrotehnіka і elektromehanіka. - 2012. - № 3. - S. 51-55.
Batygin Yu.V. Raschet `elektrodinamicheskih usilij v indukcionnoj induktornoj sisteme s neferromagnitnymi massivnym `ekranom i listovoj zagotovkoj / Yu.V. Batygin, A.V. Gnatov // Elektrotehnіka і elektromehanіka. - 2009. - № 4. - S. 56-59.
Batygin Yu.V. Raschet `elektrodinamicheskih usilij v indukcionnoj induktornoj sisteme s neferromagnitnym massivnym `ekranom i ferromagnitnoj listovoj zagotovkoj / Yu.V. Batygin, A.V. Gnatov, S.A. Drachenko, T.V. Gavrilova // Elektrotehnіka і elektromehanіka. - 2010. - №6. - S. 60-63.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2015 A. V. Gnatov
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Authors who publish with this journal agree to the following terms:
1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
