TY - JOUR AU - Volkova, O. G. AU - Zhornyak, L. B. PY - 2016/03/11 Y2 - 2024/03/29 TI - INVESTIGATION OF HIGH-CURRENT INTERRUPTING CONTACTS WORKING SURFACES MECHANICAL INTERACTION NATURE JF - Electrical Engineering & Electromechanics JA - Electrical Engineering & Electromechanics VL - 0 IS - 1 SE - Electrical Machines and Apparatus DO - 10.20998/2074-272X.2016.1.02 UR - http://eie.khpi.edu.ua/article/view/2074-272X.2016.1.02 SP - 12-16 AB - <strong><em>Introduction.</em></strong><em> The nature of the interaction of high-working surfaces of the electrical contact uniquely affects their performance. By the failure of the contacts in the main drive processes resulting from complex destructive factors affecting their performance. However, not all processes are studied in detail and give in modeling. <strong>The purpose</strong> of the paper is to show the possibility of using the method of holographic interferometry to estimate the plastic deformation in the zone of contact interaction. One of the significant factors affecting the work of the contact pair is the compressive force of the contact surfaces. Compression discontinuous contact is directly connected with the processes of elastic and plastic deformation of the contact material, which is particularly evident in the contact details of the powder or composite materials. The paper focuses on the plastic deformation of the surface layers of discontinuous contact in circuit, it is believed that it is directly related to the mechanism of conductivity of contacts. As shown, a significant effect on the deformation of the contact surfaces and renders the working environment, in particular transformer oil. <strong>Methodology.</strong> Assessing the impact of compression forces on the deformation of the contact surface was conducted experimentally using the method of holographic interferometry. <strong>Results.</strong> Experimental studies, which indicated that the compact and powder materials plastic deformation in and around the area microcontacts simplistically stated that requires experimental verification. A method for evaluating the state of stress, which affects the formation and destruction of the local contact spots. <strong>Practical value.</strong> Using the experimental method of determining the movement of the contact region allows you to optimize discontinuous contacts from composite and powder materials.</em> ER -