Analytical relations for fields and currents in magnetic-pulsed «expansion» of tubular conductors of small diameter

Authors

DOI:

https://doi.org/10.20998/2074-272X.2024.6.09

Keywords:

pulsed electromagnetic fields, cylindrical conductors of small diameter, solution of a boundary value problem, Laplace transforms

Abstract

Introduction. This work was initiated by the problems of cardiovascular diseases, which are one of the main causes of mortality of the population of our planet. More than ten years ago, in 2012, approximately 3.7 million people died of acute coronary syndrome worldwide. The fight against such pathologies is carried out with the help of so-called stents, the manufacture of which can be carried out by the method of magnetic pulse «expansion» from hollow metal cylinders. The limited production possibilities of magnetic pulse «expansion» were caused by the minimum cross-sectional size of the inductor-instrument, which can be practically manufactured. Other tools are required to perform this operation. Novelty. A system of magnetic-pulse expansion of thin-walled pipes of small diameter with an inductor that excites an azimuthal electromagnetic field in the case of direct current passing through the processing object and in the absence of its connection in an electric circuit with an inductor is proposed. Purpose. The main analytical dependencies for the characteristics of the electromagnetic processes taking place in the inductor systems for the expansion of cylindrical conductive pipes of small diameter when direct passage of current through the processed object and when it is not connected to an electric circuit with an inductor (insulated billet) is derived. Methods. The solution of the boundary value problem with given boundary conditions was carried out by applying Laplace transforms and integrating Maxwell’s equations. Results. Analytical expressions were obtained for the main characteristics of the processes: the intensities of the excited electromagnetic fields and currents in the system depending on the parameters of the studied systems. The analysis of possible technical schemes for solving the given problem indicated the choice of the optimal variant of an effective system of magnetic-pulse «stretching» of thin-walled cylindrical conductors of small diameter. Practical value. Based on the qualitative analysis of the obtained results, recommendations for the practical implementation of the proposed system were formulated. The obtained dependences allow us to give numerical estimates of the effectiveness of excitation of magnetic pressure forces on the object of processing and to choose directions for further improvement of the magnetic pulse technology for solving such problems. References 23, figures 2.

Author Biographies

Yu. V. Batygin, Kharkiv National Automobile and Highway University

Doctor of Technical Science, Professor

T. V. Gavrilova, Kharkiv National Automobile and Highway University

PhD, Associate Professor

S. O. Shinderuk, Kharkiv National Automobile and Highway University

PhD, Associate Professor

E. O. Chaplygin, Kharkiv National Automobile and Highway University

PhD, Associate Professor

References

Wald D.S., Morris J.K., Wald N.J., Chase A.J., Edwards R.J., Hughes L.O., Berry C., Oldroyd K.G. Randomized Trial of Preventive Angioplasty in Myocardial Infarction. New England Journal of Medicine, 2013, vol. 369, no. 12, pp. 1115-1123. doi: https://doi.org/10.1056/NEJMoa1305520.

Blero D., Huberty V., Devière J. Novel biliary self-expanding metal stents: indications and applications. Expert Review of Gastroenterology & Hepatology, 2015, vol. 9, no. 3, pp. 359-367. doi: https://doi.org/10.1586/17474124.2015.960395.

Jang S.I., Lee D.K. Stents with specialized functions: drug-eluting stents and stents with antireflux devices. Gastrointestinal Intervention, 2015, vol. 4, no. 1, pp. 50-54. doi: https://doi.org/10.1016/j.gii.2015.03.004.

Guerra A.J., Ciurana J. Stent’s Manufacturing Field: Past, Present, and Future Prospects. Angiography, 2019, 148 p. doi: https://doi.org/10.5772/intechopen.81668.

Jiang W., Zhao W., Zhou T., Wang L., Qiu T. A Review on Manufacturing and Post-Processing Technology of Vascular Stents. Micromachines, 2022, vol. 13, no. 1, art. no. 140. doi: https://doi.org/10.3390/mi13010140.

Qiu L., Li Y., Yu Y., Xiao Y., Su P., Xiong Q., Jiang J., Li L. Numerical and experimental investigation in electromagnetic tube expansion with axial compression. The International Journal of Advanced Manufacturing Technology, 2019, vol. 104, no. 5, pp. 3045-3051. doi: https://doi.org/10.1007/s00170-019-04217-9.

Qiu L., Zhang W., Abu-Siada A., Liu G., Wang C., Wang Y., Wang B., Li Y., Yu Y. Analysis of Electromagnetic Force and Formability of Tube Electromagnetic Bulging Based on Convex Coil. IEEE Access, 2020, vol. 8, pp. 33215-33222. doi: https://doi.org/10.1109/ACCESS.2020.2974758.

Belyy I.V., Fertik S.M., Khimenko L.T. Handbook of magnetic pulse treatment of metals. Kharkiv, Vyscha Shkola Publ., 1977. 168 p. (Rus).

Huei-Huang Lee. Finite Element Simulations with ANSYS Workbench 2019. SDC Publications, 2019. 614 p. Available at: https://www.routledge.com/Finite-Element-Simulations-with-ANSYS-Workbench-2019/Lee/p/book/9781630572990 (Accessed 15.08.2019).

Lavinsky D.V., Zaitsev Y.I. Computational analysis method of the electromagnetic field propagation and deformation of conductive bodies. Electrical Engineering & Electromechanics, 2023, no. 5, pp. 77-82. doi: https://doi.org/10.20998/2074-272X.2023.5.11.

Psyk V., Risch D., Kinsey B.L., Tekkaya A.E., Kleiner M. Electromagnetic forming – A review. Journal of Materials Processing Technology, 2011, vol. 211, no. 5, pp. 787-829. doi: https://doi.org/10.1016/j.jmatprotec.2010.12.012.

Batygin Y.V., Shinderuk S.O., Chaplygin E.O. Mutual influence of currents in plane inductor system with solenoid between two massive conductors. Electrical Engineering & Electromechanics, 2021, no. 6, pp. 25-30. doi: https://doi.org/10.20998/2074-272X.2021.6.04.

Batygin Y.V., Golovashchenko S.F., Gnatov A.V. Pulsed electromagnetic attraction of sheet metals – Fundamentals and perspective applications. Journal of Materials Processing Technology, 2013, vol. 213, no. 3, pp. 444-452. doi: https://doi.org/10.1016/j.jmatprotec.2012.10.003.

Qiu L., Yu Y., Xiong Q., Deng C., Cao Q., Han X., Li L. Analysis of Electromagnetic Force and Deformation Behavior in Electromagnetic Tube Expansion With Concave Coil Based on Finite Element Method. IEEE Transactions on Applied Superconductivity, 2018, vol. 28, no. 3, pp. 1-5. doi: https://doi.org/10.1109/TASC.2017.2789287.

Lavinsky D.V., Zaitsev Y.I. Computational studies of electromagnetic field propagation and deforming of structural elements for a thin-walled curved workpiece and an inductor. Electrical Engineering & Electromechanics, 2024, no. 2, pp. 55-60. doi: https://doi.org/10.20998/2074-272X.2024.2.08.

Batygin Y.V., Chaplygin E.A., Shinderuk S.A., Strelnikova V.A. Numerical estimates of currents and forces in linear tools of the magnetic-pulse attraction of metals. Part 1: Low electrical conductance metals. Electrical Engineering & Electromechanics, 2019, no. 5, pp. 40-44. doi: https://doi.org/10.20998/2074-272X.2019.5.07.

Volontsevich D.O., Barbashova M.V., Eremina E.F. Diffusion processes during «crimping» of tubular billets in magnetic-pulse processing of metals. Scientific Bulletin of Kherson State Maritime Academy, 2017, no. 2(17), pp. 149-160. (Rus).

Batygin Yu.V., Lavinsky V.I. Peculiarities of the magnetic pulsed expansion of the thin-walled tube samples. Electricity, 2005, no. 11, pp. 62-68. (Rus).

Batygin Y., Shinderuk S., Chaplygin E. Induction Effects In The Flat System «Circular Solenoid - Sheet Metal». 2021 IEEE 2nd KhPI Week on Advanced Technology (KhPIWeek), 2021, pp. 185-190. doi: https://doi.org/10.1109/KhPIWeek53812.2021.9570048.

Erickson G.F. Device for forming pipes of small diameter. Patеnt Germany, no. 1452934, 1965.

Thomson J.J., Elements of the Mathematical Theory of Electricity and Magnetism. London, Wentworth Publ., 2016. 560 p.

Kantorovich L. Mathematics for Natural Scientists. Fundamentals and Basics. Springer Nature Publ., 2018. 526 p.

Abramowitz M., Stegun I.A. Handbook of Mathematical Functions. Courier Corporation Publ., 1964. 1046 p.

Downloads

Published

2024-10-18

How to Cite

Batygin, Y. V., Gavrilova, T. V., Shinderuk, S. O., & Chaplygin, E. O. (2024). Analytical relations for fields and currents in magnetic-pulsed «expansion» of tubular conductors of small diameter. Electrical Engineering & Electromechanics, (6), 67–71. https://doi.org/10.20998/2074-272X.2024.6.09

Issue

Section

High Electric and Magnetic Field Engineering, Engineering Electrophysics