ALTERNATIVE INDICATORS OF POWER OF ELECTRIC ENERGY IN A SINGLE-PHASE CIRCUIT WITH POLYHARMONIC CURRENT AND VOLTAGE

Authors

DOI:

https://doi.org/10.20998/2074-272X.2019.1.06

Keywords:

power of electric energy, quality indicators, power norm, quantity and quality of electric energy

Abstract

Introduction. Many electrical engineering issues use a power balance. It is compiled from averaged power values, and equivalent power is used to characterize power of transient processes. To account electricity, both mono- and polyharmonic currents and voltages use active and reactive power, the quality of electricity is not taken into account. Problem. A number of works are declared a certain number of power components that reflect indicators of quantity and quality of electrical energy. These components of power are subject to criticism. The order of determining power components requires algorithmization, as well the task of determining indicators that will reflect poor quality of energy. Goal. Development of a technique for determining the components of power in single-phase circuits with polyharmonic current and voltage, for definition electrical energy transmission indicators. Methodology. Based on analysis of power components determined in known papers and order of their calculation, the features of taking sign of sine and cosine orthogonal components are marked, depending on combination of numbers a current and voltage harmonics. Using Fourier theory of series and elements of the logic algebra, an algorithm for determining components of electric power energy is developed. Results. Highlighting active and reactive powers of the fundamental harmonic of current and voltage; active and reactive power; canonical power components; non-canonical power components, and proposed indicators of quality of transmission of electrical energy. Originality. Based on analysis of power represented by trigonometric Fourier series, the specific calculation of canonical and non-canonical components with use of a number of indicators of electric energy transmission is proposed that reflect its quality. Practical value. The proposed power components of transmission of electrical energy can be used in technical accounting systems.

References

1. Belov M.P., Novikov A.D., Rasudov L.N. Avtomatizirovannyy elektroprivod tipovykh proizvodstvennykh mekhanizmov i tekhnologicheskikh kompleksov [Automated electric drive of standard production mechanisms and technological complexes].Moscow,PublishingCenter «Akademiya», 2007. 576 p. (Rus).

2. Wang J., Duan C. Equivalent Power Spectrum Analysis Method for Feature Extraction. 2010 International Conference on Measuring Technology and Mechatronics Automation, Changsha City, 2010, pp. 120-123. doi: 10.1109/ICMTMA.2010.222.

3. Tugay D.V. Power electronics devices in the Smart Grid. Lighting engineering and power engineering, 2016, no.2, pp. 10-26. (Rus).

4. Emanuel A.E. Power Definitions and the Physical Mechanism of Power Flow. John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex, United Kingdom, 2010. doi: 10.1002/9780470667149.

5. Zhemerov G.G., Tugay D.V. Physical meaning of the «reactive power» concept applied to three-phase energy supply systems with non-linear load. Electrical engineering & Electromechanics, 2015, no.6, pp. 36-42. (Rus). doi: 10.20998/2074-272X.2015.6.06.

6. «IEEE Recommended Practice for Monitoring Electric Power Quality» in IEEE Std 1159-2009 (Revision of IEEE Std 1159-1995), 2009, 81 p. doi: 10.1109/IEEESTD.2009.5154067.

7. «IEEE Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions» in IEEE Std 1459-2010 (Revision of IEEE Std 1459-2000), 2010, 50 p. doi: 10.1109/IEEESTD.2010.5439063.

8. Jeltsema D. Budeanu's concept of reactive and distortion power revisited. 2015 International School on Nonsinusoidal Currents and Compensation (ISNCC), 2015, pp. 1-6. doi: 10.1109/ISNCC.2015.7174697.

9. Willems J.L. Budeanu's Reactive Power and Related Concepts Revisited. IEEE Transactions on Instrumentation and Measurement, 2011, vol.60, no.4, pp. 1182-1186. doi: 10.1109/TIM.2010.2090704.

10. Zagirnyak M., Korenkova T., Kovalchuk V. Estimation of electromechanical systems power controllability according to instantaneous power components. 2014 IEEE International Conference on Intelligent Energy and Power Systems (IEPS), Kyiv, 2014, pp. 266-272. doi: 10.1109/IEPS.2014.6874192.

11. Rodkin D.I. Particularities of the using the energy method to identifications of induction motors at psevdopoligarmonical signal, Electromechanical and energy saving systems, 2009, iss.1/2009(5), pp. 7-20. (Rus).

12. Bialobrzheskyi O., Rod’kin D., Gladyr A. Power components of electric energy for technical and commercial electricity metering. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2018, no.2, pp. 70-79. doi: 10.29202/nvngu/2018-2/10.

Published

2019-02-17

How to Cite

Bialobrzeski, O. V., & Rodkin, D. I. (2019). ALTERNATIVE INDICATORS OF POWER OF ELECTRIC ENERGY IN A SINGLE-PHASE CIRCUIT WITH POLYHARMONIC CURRENT AND VOLTAGE. Electrical Engineering & Electromechanics, (1), 35–40. https://doi.org/10.20998/2074-272X.2019.1.06

Issue

Section

Theoretical Electrical Engineering