DETERMINATION OF INSULATION PARAMETERS OF CURRENT TRANSFORMERS AT MULTIPLE MEASUREMENTS IN MONITORING SYSTEMS UNDER WORKING VOLTAGE

Authors

  • V. K. Beliaev Scientific Industrial Enterprise «OST», Ukraine
  • H. N. Panenko National Technical University of Ukraine «Kyiv Polytechnic Institute», Ukraine

DOI:

https://doi.org/10.20998/2074-272X.2016.5.06

Keywords:

high voltage insulation, diagnostics, data processing procedure, processing procedure error, dielectric loss tangent, current transformer

Abstract

Features of the data processing procedures of multiple measurements of the dielectric loss tangent of the high-voltage insulation, which are based on the comparison method, were considered. Three procedures were compared: the one procedure uses an assignment of a particular standard object for comparison, and two procedures don't use assignments of the special standard objects. Expressions of methodical errors of studied procedures were obtained. Analysis and calculations, which use the obtained expressions were made. Evaluations showed that an influence of a change of the tangent of dielectric loss of one from the monitoring objects on results of estimation of the tangents of other monitoring objects is the distinctive feature of the procedures without assignment of the standard object. Errors of these procedures more than errors of the traditional procedure, with assignment of the standard object. The study demonstrated that procedures without assignment of standard objects lead to difficultly predictable methodological errors, which hinder to estimate the actual value of the loss tangent and to estimate outcomes of the monitoring, by means comparing with allowable values. Moreover, the decrease of estimations of loss tangents of all objects, as a result of occurrence of at least one the object with strongly bad parameters, hides occurrence of other unsuccessful objects with smaller deviations and makes difficult recognition of such deviations at early stages. Improvements in processing techniques which reduce earlier specified errors and reduce the amount of measurements are proposed. The study results are useful in monitoring and diagnostic of basic insulation of current transformers or high-voltage bushings.

References

1. Beliaev V.K., Borshchev P.I., Obodovskii V.D., Kanivetskii Iu.V., Bekhtev G.V., Bogdanov S.G., Masenko D.A., Dvoinykh V.P. Instrumentation and experience of monitoring of capacitor type insulation under operating voltage. Electrical networks and systems, 2012, no.4, pp. 68-72. (Rus).

2. Sakhno A.A. Measurement algorithm of the dielectric loss tangent of basic insulation of current transformers and bushings 330-750 kV under monitoring under a working voltage. Electrical engineering & electromechanics, 2010, no.2, pp. 54-56. (Rus.) doi: 10.20998/2074-272X.2010.2.14.

3. SOU-Н МPЕ 40.1.46.301:2006. Perevirka izoliatsii transformatoriv strumu 330-750 kV pid napruhoiu. Metodychni vkazivky [Standard of organization Н МPЕ 40.1.46.301:2006. Check of insulation of current transformer 330-750 kV under voltage. Methodical instructions]. Kyiv, Minpalyvenerho Publ., 2006. (Ukr).

4. Stognii B.S., Pilipenko Iu.V., Sopel' M.F., Tutik V.L. Hardware-software monitoring complex of insulation of current transformers and high-voltage bushings of power transformers. Works of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine, 2010, is.26, pp. 38-45. (Rus).

5. Shinkarenko G.V., Onishchenko V.A., Ornatskii O.A. Technologies of measurement of insulation parameters of oil-filled transformers 330-750 kV under operating voltage. Electrical networks and systems, 2012, no.3, pp. 67-71. (Rus.)

6. Svi P.M. Metody i sredstva diagnostiki oborudovaniia vysokogo napriazheniia [Methods and diagnostic tools of the equipment of a high voltage]. Moscow, Energoatomizdat Publ., 1992. 240 p. (Rus).

7. BeliaevV.K., Panenko H.N. Features of definition methods of insulation parameters in the monitoring systems of current transformers under working voltage. Bulletin of Kharkiv Petro Vasylenko National Technical University of Agriculture. Series: Technical science, 2014, no.153, pp. 122-124 (Rus).

8. BeliaevV.K., Obodovskii V.D., Panenko H.N. The analysis of sensitivity of diagnostic models for the monitoring of a transformer windings condition under load. Tekhnichna elektrodynamika, 2013, no.4, pp. 81-87. (Rus).

Published

2016-10-31

How to Cite

Beliaev, V. K., & Panenko, H. N. (2016). DETERMINATION OF INSULATION PARAMETERS OF CURRENT TRANSFORMERS AT MULTIPLE MEASUREMENTS IN MONITORING SYSTEMS UNDER WORKING VOLTAGE. Electrical Engineering & Electromechanics, (5), 40–46. https://doi.org/10.20998/2074-272X.2016.5.06

Issue

Section

Engineering Electrophysics. High Electric and Magnetic Field Engineering