MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW

Authors

  • Yu. V. Batygin Kharkov National Automobile and Highway University, Ukraine https://orcid.org/0000-0001-9422-6112
  • E. A. Chaplygin Kharkov National Automobile and Highway University, Ukraine
  • O. S. Sabokar Kharkov National Automobile and Highway University, Ukraine

DOI:

https://doi.org/10.20998/2074-272X.2016.5.05

Keywords:

magnetic pulsed processing, metal forming, printed circuit boards stamping, external flattening

Abstract

The aim of the article is dedicated to the brief review of the main achievements of the advanced technologies with usage of the energy of the pulsed magnetic fields. Originality. The new suggestions are represented. They are based on the results of development of the new scientific direction in area of the magnetic pulsed processing of thin-walled sheet metals when a penetration of the acting fields is quite significant. The known traditional approaches based on the skin-effect in electrodynamics and were successfully implemented. Methodology of the analysis consist of careful theoretical and practical experiments review and its future development. Results of the research based on the existing experimental approbation were presented visually with the description followed The known approaches to solution actual production problems based on the skin-effect in electrodynamics are described. Practical value. The first of practical propositions is related to stamping of the drawing the printed circuit boards on the cooper foil with thickness about ~50 mkm. This operation is realizing by the forces of magnetic pressure directly without any supplements introduction. The second consists in usage the magnetic pulsed attraction for external removing the dents in the car body. This operation does not demand disassembling of elemental base and allows preserving the paint of coverings. Both of these technologies could to minimize the working time, to decries the volume of the waste products and to make the manufacturing existed much cheaper.

References

1. Psyk V., Risch D., Kinsey B.L., Tekkaya A.E., Kleiner M. Electromagnetic forming – A review. Journal of Materials Processing Technology, 2011, vol.211, no.5, pp.787-829. doi: 10.1016/j.jmatprotec.2010.12.012.

2. Belyj I.V., Fertik S.M., Himenko L.T. Spravochnik po magnitno-impulsnoj obrabotke metallov [Directory of magnetic-pulse treatment of metals]. Kharkiv, Vishcha shkola Publ., 1977, 189 p. (Rus).

3. Batygin Yu.V., Lavinskiy V.I., Khimenko L.T. Impul'snyye magnitnyye polya dlya progressivnykh tekhnologiy. Tom 1. Izdaniye vtoroye, pererabotannoye i dopolnennoye. [Pulsed magnetic fields for advanced technologies. Vol.1. 2nd edition, revised and enlarged.] Kharkov, MOST-Tornado Publ., 2003. 284 p. (Rus).

4. Batygin Yu.V., Lavinsky V.I. Electromagnetic processes in an inductor system for stamping printed circuit boards. Electrical Technology Russia, 2001, no.4, pp. 129-136.

5. Batygin Yu.V., Lavinsky V.I., Khimenko L.T. Direction Change of the Force Action upon Conductor under Frequency Variation of the Acting magnetic Field. Proceedings of the 1st International Conference on High Speed Metal Forming. March 31/April 1, 2004. Dortmund, Germany, pp. 157-160.

6. Yuriy V. Batygin, Sergey F. Golovashchenko, Andrey V. Gnatov. Pulsed electromagnetic attraction of sheet metals – fundamentals and perspective applications. Journal of Materials Processing Technology, 2013, vol.213, no.3, pp. 444-452. doi: 10.1016/j.jmatprotec.2012.10.003.

7. Batygin Yu.V., Golovashchenko S.F., Gnatov A.V., Chaplygin E.A. Pulsed Electromagnetic Attraction Processes for Sheet Metal Components. Proceedings of the 6th International Conference High Speed Forming 2014, May 26-29, 2014, Daejeon, Korea, pp. 253-260.

8. Electromagnetic Dent Removal. Available at: http://www.electroimpact.com/EMAGDR/overview.asp (accessed 25 May 2014).

9. Need an electromagnetic dent remover on hand. Fluxtronic offers the best: the Portable Flux 3 dent remover. Available at: http://www.fluxtronic.com/product.php (accessed 07 August 2014).

10. Laboratoriia elektromagnitnykh tekhnologii (Laboratory of Electromagnetic Technology) Available at: http://electromagnetic.comoj.com (accessed 10 July 2014).

Downloads

Published

2016-10-31

How to Cite

Batygin, Y. V., Chaplygin, E. A., & Sabokar, O. S. (2016). MAGNETIC PULSED PROCESSING OF METALS FOR ADVANCED TECHNOLOGIES OF MODERNITY – A BRIEF REVIEW. Electrical Engineering & Electromechanics, (5), 35–39. https://doi.org/10.20998/2074-272X.2016.5.05

Issue

Section

Engineering Electrophysics. High Electric and Magnetic Field Engineering