ANALYSIS OF ELECTROMAGNETIC PROCESS IN COMBINED INDUCTOR SYSTEMS, AS TOOLS FOR STRAIGHTENING OF MODERN CAR

Authors

  • D. O. Voloncevich National Technical University «Kharkiv Polytechnic Institute», Ukraine
  • M. V. Barbashova Kharkov National Automobile and Highway University, Ukraine
  • O. S. Sabokar Kharkov National Automobile and Highway University, Ukraine

DOI:

https://doi.org/10.20998/2074-272X.2015.4.09

Keywords:

combined inductor system, external straightening, low-frequency magnetic field

Abstract

The field in combined inductor systems exists only over workpiece, it occurs at only a low-frequency circular magnetic field. In this paper electromagnetic processes in tools of the magnetic pulse attraction (the combined inductor systems) are analyzed. Investigation based on numerical estimations, using previously obtained analytical relations for the excited fields and forces. Calculations are necessary for the successful implementation of straightening metal coatings bodies car. A distribution of relative intensity of magnetic fields to surfaces of sheet workpiece in the centre of a working zone is obtained. The distribution of amplitude tangential component intensity of resulting magnetic field of the surface of sheet metal along the centre of a rectangular coil is received. Feature of the combined induction system is non-uniformly distributed forces of attraction in the work area. The results showed that the calculated working area on the outer surface of sheet workpiece magnetic field strength will be less than 5% of the field strength of a circular low-frequency source. Calculations have shown the effectiveness of the proposed instrument magnetic pulse straightening metal coating bodies car. The actual amplitude of distributed attraction forces are ~ 7.7 MPa.

References

Proceedings of the 1st International Conference on High Speed Metal Forming. (ICHSF 2004). March 31/April 1, 2004. Dortmund, Germany.

Batygin Yu.V., Lavinskiy V.I., Bazhinov A.V. Magnetic pulsed methods and systems for attraction of thin sheet metal. Trudy mezhd. nauchn.-tekhn. konf. «Magnitno-impul'snaya obrabotka metallov. Puti sovershenstvovaniya i razvitiya» [Proceedings of Int. Sci.-Tech. Conf. «Magnetic pulsed treatment of metals. Ways to improve and develop»]. Samara (Russia), 18-19 September, 2007, pp. 3-13. (Rus).

Yuriy V. Batygin, Sergey F. Golovashchenko, Andrey V. Gnatov. Pulsed electromagnetic attraction of sheet metals – fundamentals and perspective applications. Journal of Materials Processing Technology, 2013, vol.213, no.3, pp. 444-452. doi: 10.1016/j.jmatprotec.2012.10.003.

Hendrickson et al. (The Boeing Company). Patent US, no.4.986.102, 1991.

Voloncevich D.O., Barbashova M.V., Radchenko E.S. Calculation of fields in a combined inductor system as a tools of straightening of metal coating of car body. Elektrotekhnіka і elektromekhanіka – Electrical engineering & electromechanics, 2015, no.3, pp. 55-58. (Rus).

Batygin Yu.V., Lavinskiy V.I., Khimenko L.T. Impul'snyye magnitnyye polya dlya progressivnykh tekhnologiy. Tom 1. Izdaniye vtoroye, pererabotannoye i dopolnennoye. [Pulsed magnetic fields for advanced technologies. Vol.1. 2nd edition, revised and enlarged.] Kharkov, MOST-Tornado Publ., 2003. 284 p. (Rus).

Published

2015-08-29

How to Cite

Voloncevich, D. O., Barbashova, M. V., & Sabokar, O. S. (2015). ANALYSIS OF ELECTROMAGNETIC PROCESS IN COMBINED INDUCTOR SYSTEMS, AS TOOLS FOR STRAIGHTENING OF MODERN CAR. Electrical Engineering & Electromechanics, (4), 49–52. https://doi.org/10.20998/2074-272X.2015.4.09

Issue

Section

Engineering Electrophysics. High Electric and Magnetic Field Engineering