• V. F. Bolyukh National Technical University "Kharkiv Polytechnic Institute", Ukraine https://orcid.org/0000-0001-9115-7828
  • S. V. Oleksenko National Technical University "Kharkiv Polytechnic Institute", Ukraine
  • I. S. Schukin Firm Tetra, LTD, Ukraine




linear impulse of electromechanical converter, induction-dynamic, electrodynamic, electromagnetic converters, the synthesis parameters, the integral efficiency index


Considered linear impulse electromechanical converters (LIEC) are used to create a significant impact and high-acceleration actuators on a short active site. The most effective types of LIEC are induction-dynamic (IDC), electro-dynamic (EDC) and electro-magnetic (EMC) converters. In all these types of short-term excitement LIEC carried briefly of the inductor from a pulsed source. This occurs when the magnetic field of the inductor causes the electro-dynamic or electromagnetic forces, leading to a linear movement of the armature. However, the issue at evaluating the effects of IDC, EDC and EMC, for creating a shock simultaneously with high speed to the specified criteria in the presence of ferromagnetic core virtually unexplored. The paper presents the simulated computer-WIDE 2D model of LIEC of coaxial configuration with ferromagnetic core by using software package COMSOL Multiphysics 4.4, taking into account the related electro-magnetic, thermal, and magnetic fields. In addition a synthesis of high-performance IDC, EDC and EMC to ensure maximum impact and speed of the operating element, whereby the comparative analysis of the effectiveness of the IDC, EDC and EMC via an integral index, taking into account the maximum value and momentum of electro-dynamic or electromagnetic force acting on the armature, maximum and average speed armature, efficiency, mass and dimensions performance transducer stray field, the maximum current density in the inductor is carried out. On the basis of the eight selection policies set the most efficient types of power and speed LIEC. It is shown that any one of the strategies IDC selection is not the best. To ensure maximum impact force is the most effective EMC and to ensure the greatest speed – EDC.


Bolyukh V.F., Shchukin I.S. Lineinye induktsionno-dinamicheskie preobrazovateli [Linear induction-dynamic converters]. Saarbrucken, Germany, LAP Lambert Academic Publ., 2014. 496 p. (Rus).

Ugarov G.G., Neiman V.Y. Trends in the development and use of hand-held drum machines with electromechanical energy conversion. Izvestiia vuzov. ElektromekhanikaProceedings of the universities. Electromechanics, 2002, no.2, pp. 37-43. (Rus).

Neiman V.Y. Analysis of the processes of energy conversion of linear electromagnetic machines with preliminary accumulation of magnetic energy in dynamic modes. ElektrotekhnikaElectrical Engineering, 2003, no.2, pp. 30-36. (Rus).

Zdor G.N., Mamut A.V., Mamut V.S., Smotrakov D.V. Development of effective technological devices for magnetic elastoimpulsnoy cutting-punching thin materials. Metalloobrabotka Metal Processing,2001, no.2, pp. 28-32. (Rus).

Gurin A.G., Naboka B.G., Gladchenko V.J. Wave phenomena in electromagnetic emitters and the formation of complex acoustic signals. Tekhnichna elektrodynamika – Technical electrodynamics, 2001, no.2, pp. 3-6. (Rus).

Fair H.D. Electromagnetic launch science and technology in the United States enters a new era. IEEE Transactions on Magnetics, 2005, vol.41, no.1, pp. 158-164. doi: 10.1109/tmag.2004.838744.

Reck B. First design study of an electrical catapult for unmanned air vehicles in the se­veral hundred kilogram range. IEEE Transactions on Magnetics, 2003, vol.39, no.1, pp. 310-313. doi: 10.1109/tmag.2002.805921.

Strizhakov E.L., Neskoromnyi S.V., Merkulov R.V. Impact capacitor welding with pulsed magnetic drive. Svarochnoe proizvodstvo – Welding Engineering, 2009, no.2,pp. 33-35. (Rus).

Bolyukh V.F., Luchuk V.F., Rassokha M.A., Shchukin I.S. High-efficiency impact electromechanical converter. Russian electrical engineering, 2011, vol.82, no.2, pp. 104-110. doi: 10.3103/s1068371211020027.

Tumanov I.E. Parametric electromagnetic exciter low frequency mechanical vibrations for monitoring, measuring and dispensing multifractional liquid products mass. ElektrotekhnikaElectrical Engineering, 2013, no.8, pp. 48-52. (Rus).

Upshaw J.L., Kajs J.P. Micrometeoroid impact simulations using a railgun elec­tro­mag­netic accelerator. IEEE Transactions on Magnetics, 1991, vol.27, no.1, pp. 607-610. doi: 10.1109/20.101103.

Koscov E.G. A microelectromechanical accelerator solid objects. Avtometriia Avtometriya, 2012, no.4, vol.48, pp. 93-103. (Rus).

Bolyukh V.F., Katkov I.I. Cryogenic cooling system «Krioblast» increased efficiency and lowered the operation time of protective electrical induction-induced devices // Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition. Volume 8B: Heat Transfer and Thermal Engineering, November 15-21, 2013. San Diego, CA, USA. Code 105847, 10 pgs. doi: 10.1115/imece2013-62383.

Bissal A., Magnusson J., Engdahl G. Comparison of two ultra-fast actuator concept. IEEE Transactions on Magnetics, 2012, vol.48, no.11, pp. 3315-3318. doi: 10.1109/tmag.2012.2198447.

Tatmyshevsky K.V., Kozlov S.A. Magnetic pulse installation for testing products for aerospace shock effects. Aviakosmicheskoe priborostroenieAerospace Instrument, 2005, no.12, pp. 52-57. (Rus).

Tyutkin V.A. Magnetic pulse method for breaking arches and cleaning of process equipment from adhering materials. ElektrotekhnikaElectrical Engineering, 2002, no.11, pp. 24-28. (Rus).

Kuznetsov P.V., Tolmachev N.S., Kharitonov V.D. Induction-dynamic system cleaning drying equipment. Molochnaia promyshlennost' Dairy Industry, 1989, no.1, pp. 25-26. (Rus).

Tatmyshevsky K.V., Marychev S.N., Kozlov S.A. Magnetic pulse propelling means defeat for active protection systems objects of particular importance. Sovremennye tekhnologii bezopasnosti Modern security technology, 2005, no.4, pp. 8-11. (Rus).

Chemerys V.T., Bolyukh V.F., Mashtalir V.V. The project analysis of induction thruster parameters for the field mortaring. Suchasni informatsiyni tekhnolohiyi u sferi bezpeky ta oborony – Modern information technologies in the field of security and defense, 2010, no.1(7), pp. 22-28.

Bolyukh V.F., Markov A.M., Luchuk V. F., Shchukin I.S. Device for computer information security from unauthorized access on the basis of an induction-dynamic motor. Elektrotekhnіka і elektromekhanіkaElectrical engineering & electromechanics, 2008, no.2, pp. 5-10. (Rus).

Bolyukh, V.F., Vinnichenko A.I. Concept of an induction-dynamic catapult for a ballistic laser gravimeter. Measurement Techniques, 2014, vol.56, iss.10, pp. 1098-1104. doi: 10.1007/s11018-014-0337-z.

Bolyukh V.F., Oleksenko S.V., Shchukin I.S. Comparative analysis of electromechanical transducers shock induction-dynamic, electromagnetic and electrodynamic type // Visnyk NTU «KhPІ»Bulletin of NTU «KhPІ», 2014, no.38(1081), pp. 30-44. (Rus).

Bolyukh V.F., Oleksenko S.V., Katkov I.I. The use of fast cryogenic cooling and ferromagnetic core greatly increases efficiency of a linear induction-dynamic converter. Refrigeration Science and Technology. 13th International Institute of Refrigeration Conference on Cryogenics. Prague, Czech Republic, April 7-11, 2014. Code 106226. pp. 268-275.

Bolyukh V.F. Inductive dynamic motor. Russian electrical engineering, 2000, vol.71, part 10, pp. 39-48.

Bolyukh V.F., Shchukin I.S. The thermal state of an electromechanical induction converter with impact action in the cyclic operation mode. Russian electrical engineering, 2012, vol.83, no.10, pp. 571-576. doi: 10.3103/s1068371212100045.

Bolyukh V.F., Lysenko L.I., Bolyukh E.G. Parameters of high-efficiency pulsed inductive electromechanical converters. Russian Electrical Engineering, 2004, vol.75, no.12, pp. 1-11.



How to Cite

Bolyukh, V. F., Oleksenko, S. V., & Schukin, I. S. (2015). EFFICIENCY OF LINEAR PULSE ELECTROMECHANICAL CONVERTERS DESIGNED TO CREATE IMPACT LOADS AND HIGH SPEEDS. Electrical Engineering & Electromechanics, (3), 31–40. https://doi.org/10.20998/2074-272X.2015.3.05



Electrotechnical complexes and Systems

Most read articles by the same author(s)

1 2 > >>